食品金属探测器
检测食品加工冷冻肉类、菌类、糖果、饮料、粮食、果蔬、乳制品、海产品、保健品、添加剂、蛋糕、面条、汤圆、饺子、月饼、枣子、枸杞子、糕点、饼干、巧克力、水果、粽子、和调味品等行业产品中的金属杂质,吉祥棋牌-波克棋牌-鼎丰棋牌:确保产品无金属污染,提供可靠的品质保证。

本文地址:http://www.kyohdai.com/product/html/98.html
文章摘要:食品金属探测器,别创一格信号隔离通信员,彝人堂吉诃德移花宫。

金属探测器(轻载机)

CY-SP-Q金属探测器(食品探测器)可以从包装成品或散料中检测出所有金属杂质,包括铁、不锈钢、铜、铝等。CY-SP-Q金属探测器一旦检测到金属后报警带停,可人工除去含金属杂质的产品。CY-SP-Q食品探测器的检测头采用了新型检测线圈技术,在检测精度不受影响的情况下检测的非金属区大大减小,使得整个系统小巧紧凑,短小的机身也方便集成于现有的传输带系统.

【金属探测器详细说明】

品名:食品金属探测器

品牌:诚语

产地:上海

型号:CY-SP-Q金属探测器

应用特性检测产品:块状产品(包括已包装的产品,如包装后的散料)

安装于:传送带流水线

途: 

1、检测食品加工、纺织、化工等行业产品中的金属杂质,确保产品无金属污染,提供可靠的品质保证。

2
、检测塑料橡胶、纺织、木材、矿业等行业原料中的金属杂质,保护关键设备,减少停工、维修时间和费用,提高工作效率。

使用行业:食品行业、化学行业、塑料行业、医药行业、纺织行业、包装行业、其他行业

CY-SP-Q食品金属探测器特性:新型线圈技术(非金属区更小),因此输送机机身更短小,最大承重为5kg

全镜面不锈钢结构,确保机器的检测稳定,性能良好,使用寿命长;满足食品行业的卫生要求,拆卸简单,方便清洗;

可手动学习并补偿产品效应。

检测产品效应大或特殊包装的物品时,可选低频处理技术。

满足IFSHACCP认证要求.

金属探测器系统组成:

检测系统:双通道金属探测圈 ,长方形口径(不可分的) Detection system:

控制系统:ADLINE微处理控制器

传 送 机:全焊接,高强度不锈钢结构,联体式PU(聚氨酯) 输送带

动:90W电机、减速箱集成化

CY-SP-Q金属探测器典型应用:包装后检测--出厂前的最后金属检测、 称重时检测、 贴标签时检测

金属探测器技术参数:

设备长度:1000mm 输送带离地高度:680mm

有效检测通道 (宽度/高度):250300400/100120150±25

检测精度:Φ铁球不锈钢 :0.71.01.2/1.52.02.3

金属探测仪(食品探测器)检测灵敏度(单位mm):

以上灵敏度为空机无环境干扰条件下测得,金属探测器实际使用会因产品成分干扰和使用环境的不同略有差异。

Food Metal detectors:

Application features detection products: block products (including packaging products, such as packaging of bulk materials)
Installed in: belt line

Product Uses:

 

1, the detection of metallic impurities in the food processing, textile, chemical industry products, metal pollution, provide a reliable quality assurance.

 

Detect metal impurities in the raw materials of plastics, rubber, textiles, timber, mining and other industries, the protection of critical equipment, reduce downtime, maintenance time and costs, and improve work efficiency.
Food industry, chemical industry, pharmaceutical industry, textile industry, packaging industry, other industries.

OMD-A-M Metal detectors can detect the iron impurities from the products with aluminum foil or metallized packaged .With the new technology of detection coil,the detector can make the whole system more smaller In the case of detection accuracy is not affected . Short body is also convenient for the existing transmission system to integrated with.

With the new technology of new coil (it will be more smaller in the Non-metallic area) , the conveyor body is more smaller.

The maximum load is 5kg.
The stainless steel structure with full mirror can ensure the stability of the machine detect, good performance and long life for use.
It is also satisfied with the requirements of food industry hygiene for easily removed and cleaned.


It can selectable low-frequency processing technology when detect the product with large effects or special packaging.
Meet the requirements of IFS and HACCP certification.
Dual-channel metal detection coil with rectangular aperture (no points)
Control system: ADLINE microprocessor controller
Conveyors: Joint-body PU (polyurethane) conveyor belt with all welded, high strength stainless steel structure

Drive: 90W motor, gear box integration
Detect the products before them leave the factory: The final metal detection(After packing, when weighing, when labeling)
Device Length: 1000mm Ground Clearance belt: 680mm
Effective detection channel (width / height): 250,300,400 / 100,120,150
± 25
Detection accuracy:
Φ ball / Φ stainless steel: 0.7,1.0,1.2 / 1.5,2.0,2.3

主要产品:食品金属探测器  食品金属检测机  食品金属检测仪
版权所有:吉祥棋牌-波克棋牌-鼎丰棋牌 电话:021-57363964  邮箱:cyf9996@126.com